In order to manage Vega gateways with FreePBX/PBXact Vega gateway module, we need to associate Vega gateways to the PBX.
We have below two ways of adding a Vega gateways to the PBX
PBX Vega module main landing page has an option to perform "Network Discovery" of Vega gateways in customer provided subnet as described in below screenshot.
Network scan might take a few minutes as it will try to fetch the information from each discovered Vega gateways.
Once network scanning is over, the PBX Vega Module will display list of available gateways as described in below screenshot -
From here , we can perform following two operations -
1) Configure Vega Gateways - We can proceed with configuration of Vega Gateways by selecting "Configure" action against each Vega gateway. Refer to "Configuration" section.
2) Firmware Upgrade - We can upgrade the firmwares to selected Vega gateways by selecting "Upgrade firmware" action. Refer to "Vega Firmware" section.
The Vega module main landing page has an option to perform "Add Vega" as described in below screenshot.
The PBX Vega Gateway module will then automatically syncronize with the Vega Gateway described above and will display a screen, similar to the screenshot below:
The Vega Gateway serial and model number is fetched from Vega Gateways
WIth the Vega Gateway now connected to FreePBX / PBXact, proceed with configuration of Vega gateway.
Refer to "Configuration" section.