This wiki explains how to use the FreePBX SIPSTATION Module in conjunction with SIPStation SIP Trunk service. The SIPSTATION Module helps you configure your trunks, routes, and DIDs in just a few clicks. This wiki assumes you have already set up a SIPStation account as described in our wiki "Creating a SIPStation Account."

The SIPSTATION Module, when combined with a SIPStation SIP Trunk account, provides a quick and easy method for getting a SIP Trunk online and ready to go fast. In general, there is not much to adjust here besides pointing your new DIDs or adding an Area Code for 7-digit dialing.

 

Table of Contents

Downloading or Installing the SIPStation Module

Using the SIPStation Module

Adding a SIPStation FreePBX Module Keycode

  1. Navigate to your SIPSTATION Module, where you should see a screen like this:


  2. Log into the SIPStation Store from within the module. If you have multiple registrations, the system will ask you to choose one.




  3. Click "My Account."


  4. click on the Account Configuration tab
     
  5. You will see your FreePBX Module Keycode. You are going to need to copy it, but it is very long, so we recommend that you simply click the "Copy to Clipboard" button to copy the information to your computer's clipboard.


  6. Scroll back up the page in your SIPSTATION Module and look for the Account Key field. Paste your account key into this field.


  7. Click "Add Key" to connect your SIPStation service to FreePBX.


  8. After you have entered your key, your screen might look like this:


  9. Click the "Apply Config" button at the top of the module.


  10. Now, your screen should look like this:
    Note that you would normally see the entire external IP Address.


Managing an Account Key, Refreshing Account Info, & Running a Firewall Test

After you associate a SIPStation account key with your SIPSTATION module, you will see several new buttons:

System Status

The System Status section displays current settings and allows you to check for any warnings.
Note that you will see your actual Ip information as the pictures below are just an example.   
 

Account Settings

The Account Settings area shows you your current settings and allows you to make changes in certain areas. If you make any changes, click the "Update Account Info" button at the bottom of this section, followed by the "Apply Config" button at the top of the module.

 

E911 Information 



Route and Trunk Configuration

The Route and Trunk Configuration section shows you which trunk(s) each route is allowed to use, and gives you the opportunity to enable 7-digit dialing. If you make any changes, click the "Update Route/Trunk Configurations" button, followed by the "Apply Config."

DID Configuration 

DID Configuration is found at the bottom of the module. Here you will see a list of your DIDs, a description (if desired), and where the DID is routed to. If a DID is routed to an extension, you can choose whether you would like the extension CID to be set as the DID. You can also set failover numbers for each DID, change the Emergency CID, and see the information for the most recent inbound call. The color of the DIDs relates to their E911 status, which is explained in our "E911 Service" wiki. If you make any changes here, click the "Update DID Configurations" button followed by the "Apply Config" button.
 

 SIPStation Support

Our SIPStation wiki contains answers to frequently asked questions related to the service. Visit "SIPStation and FAXStation" to navigate around various SIPStation-related wikis.

For SIPStation-related technical support, please open a ticket in our online Support Center. The process is described in our "Support" wiki.


Network Requirements

SIPstation module receives data from push2.schmoozecom.com and you need to allow traffic from there.