Premium SIPStation SIP Trunking encrypts SIP and RTP with TLS and SRTP between your PBX site and Sangoma's Data Centers. This feature is presently under BETA testing. If you would like to be part of the testing, please complete this short survey first →

Prior to using this page as a guide, our technical staff have to enable the feature in our back office systems.

This documentation provides the quickest, easiest setup for configuring your Vega100G/200G/400G device to SIP trunk directly to the SIPStation platform.      

Locating your SIPStation Username and Password

You will need to know the SIP Username and Password for the SIPStation account being configured to the Vega100G/200G/400G to complete this setup.  

Configuring your Vega100G/200G/400G with Quick Config

The following instructions will help you set up a SIP trunk to the SIPStation peer and route the specified DID to an interface off the Vega100G/200G/400G device.  

When finished, you can manually create a second SIP Trunk Profile for for redundancy.   

-  use

-  use

-  Registration and Authentication ID: SIP Username

-  Authentication Password:  SIP Password       

G711Ulaw, G711Alaw, G729 and t38udp 

 -  use '.*' wildcard unless specifying specific routing rules  

 -  example, Protocol type of NI2, Framing ESF/B8ZS, NE port and default Channel Allocations  

Apply Changes and Save boxes will appear along the Control Panel.

-  Click on Apply Changes first, then Save until they are no longer in red color.

-  Click on Status and then Show SIP Registrations, you’ll want to see registered.