Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

The FreePBX Distro is maintained and put out by the project. Lots of other companies will bundle FreePBX GUI on their own LAMP (Linux, Asterisk, MySQL, PHP and Asterisk) stack, but that does not mean those systems are the Official FreePBX Distro.

Below are steps to determine if you are using the Official FreePBX Distro.

From the CLI:

On newer systems, execute the following command from the CLI:

cat /etc/schmooze/pbx-version

On older systems, execute the following command from the CLI:

cat /etc/asterisk/freepbxdistro-version

From the System Admin Module:

Open the System Admin module in the GUI, and view the PBX Firmware version number in the module's home page:

What do the Version Numbers Mean?

The FreePBX Distro Version Numbering System tells you at a glance what the core pieces of each track are.

In the example above, FreePBX Distro 10.13.66-2:

10.13.66-2 - The first number 10 represents the Major Track Number

10.13.66-2 - The second number 13 refers to FreePBX 13 GUI 

10.13.66-2 - The third number 66 refers to Linux OS 6.6 operating system

10.13.66-2 - The final number 2 is used as the Minor Release Revision of this Major Track Number

To find out what version your FreePBX Distro is please execute this command from the Linux CLI.
cat /etc/schmooze/pbx-version on newer systems
  • No labels