Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

I get an error that says "noserver" when trying to use the FreePBX SIPSTATION module?

This error is often the result of some very aggressive firewalls with content filtering or equivlanent. The Sonicwall is a common one that gives this problem and you may see it creating problems for Module Admin online access in FreePBX as well. (If this is the case, the content filtering will have to be disabled or the PBX or our server target will have to be configured to bypass the filtering.) This error means that the module did not get a response from our servers when trying to obtain your account information. If you can get to your account in our portal,, then the server is available and the problem is on your side. Other causes could be DNS issues not resolving the hostname. We have had reports from trixbox users that rebooting their system resolved the issue, which could be the result of a first time install that did not complete.

  • No labels