Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 15 Next »

Initial System Setup

When installing the machine, at package selection make sure you pick - at least - OpenSSH Server, and 'LAMP Packages'.  This installs the base packages required.

Configure your root password.

sudo passwd root

Switch to the Root User

sudo -i

Update Your System

apt-get update && sudo apt-get upgrade -y 

Install Required Dependencies

apt-get install -y build-essential linux-headers-`uname -r` openssh-server apache2 mysql-server\
  mysql-client bison flex php5 php5-curl php5-cli php5-mysql php-pear php-db php5-gd curl sox\
  libncurses5-dev libssl-dev libmysqlclient-dev mpg123 libxml2-dev libnewt-dev sqlite3\
  libsqlite3-dev pkg-config automake libtool autoconf git subversion unixodbc-dev uuid uuid-dev\
  libasound2-dev libogg-dev libvorbis-dev libcurl4-openssl-dev libical-dev libneon27-dev libsrtp0-dev\
  libspandsp-dev
 

Reboot server

reboot

Install PearDB

pear uninstall db
pear install db-1.7.14

Install Dependencies for Google Voice

Install iksemel

cd /usr/src
wget https://iksemel.googlecode.com/files/iksemel-1.4.tar.gz
tar xf iksemel-1.4.tar.gz
cd iksemel-*
./configure
make
make install

Install and Configure Asterisk

Download Asterisk source files.

cd /usr/src
wget http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.4-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-12-current.tar.gz
git clone https://github.com/akheron/jansson.git
git clone https://github.com/asterisk/pjproject.git

Compile and install DAHDI.

If you don't have any physical hardware you don't need to run these commands

cd /usr/src
tar xvfz dahdi-linux-complete-current.tar.gz
cd dahdi-linux-complete-*
make all
make install 
make config

Compile and install LIBPRI.

If you don't have any physical hardware you don't need to run these commands

cd /usr/src
tar xvfz libpri-1.4-current.tar.gz
cd libpri-*
make
make install

 

Compile and install pjproject

cd /usr/src/pjproject
./configure --enable-shared --disable-sound --disable-resample --disable-video --disable-opencore-amr
make dep
make
make install

Compile and Install jansson

cd /usr/src/jansson
autoreconf -i
./configure
make
make install

Compile and install Asterisk

cd /usr/src
tar xvfz asterisk-12-current.tar.gz
cd asterisk-*
./configure
contrib/scripts/get_mp3_source.sh
make menuselect

You will be prompted at the point to pick which modules to build. Most of them will be enabled, but if you want to have MP3 support, you need to manually turn on 'format_mp3' on the first page.

After selecting 'Save & Exit' you can then continue

make
make install
make config
ldconfig

 

Install Asterisk-Extra-Sounds

Note that this installs the (8khz) 'wav' soundfiles. If you're planning on running G722 (High Definition 'Wideband') audio, you also want to download the 722 codec pack, which is the second part. If you're not planning on using Wideband, you can skip that part.

cd /var/lib/asterisk/sounds
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-extra-sounds-en-wav-current.tar.gz
tar xfz asterisk-extra-sounds-en-wav-current.tar.gz
rm -f asterisk-extra-sounds-en-wav-current.tar.gz
# Wideband Audio download 
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-extra-sounds-en-g722-current.tar.gz
tar xfz asterisk-extra-sounds-en-g722-current.tar.gz
rm -f asterisk-extra-sounds-en-g722-current.tar.gz

Install and Configure FreePBX

Download and extract FreePBX.

wget http://mirror.freepbx.org/freepbx-12.0.3.tgz
tar vxfz freepbx-12.0.3.tgz

Now create the Asterisk user and set ownership permissions.

useradd -m asterisk
chown asterisk. /var/run/asterisk
chown -R asterisk. /etc/asterisk
chown -R asterisk. /var/{lib,log,spool}/asterisk
chown -R asterisk. /usr/lib/asterisk
rm -rf /var/www/html

A few small modifications to Apache.

sed -i 's/\(^upload_max_filesize = \).*/\120M/' /etc/php5/apache2/php.ini
cp /etc/apache2/apache2.conf /etc/apache2/apache2.conf_orig
sed -i 's/^\(User\|Group\).*/\1 asterisk/' /etc/apache2/apache2.conf
service apache2 restart

Prepare MySQL

You now need to generate a secure password for FreePBX to use to talk to MySQL.

export ASTERISK_DB_PW=`dd if=/dev/urandom bs=1 count=32 2>/dev/null | base64 - | cut -c2-18`

That will generate a quasi-random 16 character long password, which should be secure enough for most things.  If you had set the MySQL 'root' password to be something when you were installing the machine, you will need to add a -pyourpassword flag to the following lines

Configure Asterisk database in MYSQL. 

mysqladmin -u root create asterisk
mysqladmin -u root create asteriskcdrdb

Set permissions on MYSQL database.

mysql -u root -e "GRANT ALL PRIVILEGES ON asterisk.* TO asteriskuser@localhost IDENTIFIED BY '${ASTERISK_DB_PW}';"
mysql -u root -e "GRANT ALL PRIVILEGES ON asteriskcdrdb.* TO asteriskuser@localhost IDENTIFIED BY '${ASTERISK_DB_PW}';"
mysql -u root -e "flush privileges;"

Restart Asterisk and install FreePBX.

./start_asterisk start
./install_amp --installdb --username=asteriskuser --password=${ASTERISK_DB_PW}
amportal chown
amportal a ma installall
amportal a reload
amportal a ma refreshsignatures
amportal chown

Finally, one last mod and start FreePBX.

ln -s /var/lib/asterisk/moh /var/lib/asterisk/mohmp3
amportal restart

Start FreePBX

Navigate: 

Now FreePBX is installed, it will be available via Apache. Open up your web browser and visit:

    http://Address.Of.FreePBX.Server/admin

 

  • No labels