Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

We are going to walk through a simple and typical setup of FreePBX.  It would be impossible to teach you through a wiki how to configure the over 1000 features of FreePBX in a single wiki but the flow before should allow any brand new user to get a basic system setup.  This setup assumes you have purchased the (System Building Basic) commercial module bundle to make setting up phones and your PBX much easier and will assume you are using SIP trunks.  In our example we will use SIPStation for our trunking and the SIPStation module makes setting up FreePBX a breeze as it does most of the work for us.


Configuration of the PBX is done using the various FreePBX Modules.  The modules are divided into several categories at the top of the GUI.  Once you're at a specific module's page, you can hover your mouse over the title of each entry and get instructions on what the entry does.  For detailed instructions on each module, start here:  FreePBX Modules Home.

Create Extensions


Setup Trunking


Create Inbound Routes


Create Outbound Routes


Configure Phones (Using EPM)


Setup Ring Groups


Setup Company Directory


Setup IVR


Setup Time Groups and Conditions


Setup Users in (User Management)


Conference Room

Page Groups


Follow Me

Setting up Backups


There are many other modules, and most are self-explanatory. You can find out more about each of them here:  FreePBX Modules Home.


  • No labels