Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Try to uploaded DSP Firmware manually using SCP operation on to VEGA /tmp/ folder via 2022 port (either using winscp from windows or using scp command from linux)
    one can enable 2022 port on to VEGA as provided in Advanced Debugging link

  • Now if the scp if failed due to space not available on to vega then check if there is any core file present in / folder or any invalid file present within VEGA on VEGA then remove the same and try upgrade procedure again. If still the DSP Upgrade procedure is failed then go to next step and follow further processthe please contact sangoma support.
Note
titleNOTE

In order to avoid such situations it is preferred to run below commands before Upgrade DSP:

1) Take backup of the current configuration

2) factory reset the VEGA box

3) Reboot VEGA box

4) Upgrade DSP

5) Upload the backed up configuration once DSP upgrade is successful


If even going through the DSP Upgrade Procedure is DSP is not upgraded and on VEGA UI it just showing that the DSP Upgrade is Failed the Possible reason of DSPIf DSP Failure is not DSP Failure is is not because of DSP Upgrade required then follow below steps:

...