Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Once logged into your Switchvox server follow these steps to configure your SIPStation Trunks

     
  • Navigate to System Setup > VOIP Providers


  •  Under "VOIP Providers" click on "Create SIP Provider"


  • Click on the Provider Information tab and fill out the following information;
    • SIP Provider Name- SIPStation1
    • Your Account ID- Paste in your SIP Username from SIPStation Account Page that you got in step 1.
    • Your Password- Paste in your SIP Password from SIPStation Account Page that you got in step 1.
    • Hostname/IP address-  This should be trunk1.freepbx.com.
    • Callback Extension- Should be a default extension on your system as per Switchvox Requirements.
    • DTMF Mode- RFS2833RFC2833

            

  • Click on the Peer Settings tab and fill out the following information;
    • Host Type- Provider
    • Host is a Switchvox PBX- No
    • Treat system's users like local users- No
    • Apply Incoming Call Rules to Provider- Verify this is set to Yes


  • Click on the Caller ID Settings tab and fill out the following information;
    • Supports Changing Caller ID- Yes
    • Caller-ID method- From Header


  • Click on the Connections Settings tab and fill out the following information;
    • SIP Port- 5060
    • SIP Expiry- 120
    • Always Trust this Provider- Yes
    • Qualify Host- Yes


  • Click on the Call Settings tab and fill out the following information;
    • ULAW- Yes
    • ALAW- Yes


  • When done press the Save SIP Provider button at the bottom of the page to save all you settings.

...