Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

hen customer having an issue where incoming calls from t1 pri are not being sent a ringback tone and if it is required that the Vega generates these progress tones on the TE ISDN interface, then at the CLI prompt type:

set _advanced.isdn.user_progress=1

Save and reboot Vega to activate the changes.


Notes:

1. If the Vega DSL is configured as NT it will always generate the call progress tones. E.g. ringback and disconnect tones.

2. Typically wait_for_connect and user_progress configuration parameters should either both set to 1 or both set to 0.

ftp://ftp.sangoma.com/vega/legacy/1-step-by-step-configuration/Base%20documents/Initial%20config%20-%20R6%20Vega%20100%20E1%20(SIP)_06.pdf

Content by Label
showLabelsfalse
max5
spacesVG
showSpacefalse
sortmodified
reversetrue
typepage
cqllabel = "kb-troubleshooting-article" and type = "page" and space = "VG"
labelskb-troubleshooting-article