Appliance USB to Serial Cable
Sangoma USB to Serial RJ45 cable is used to connect Sangoma appliances to a Linux or Windows workstation.
Windows Driver Download
- Sangoma Appliance USB to Serial Cable Drivers
- Connect using putty, hyperterminal
Linux Drivers
- Linux distros already have support by default.
- Connect using minicom, putty
Mac Drivers
- Mac Computers already have support by default.
- connect using terminal
- screen /dev/tty.usbserial-A9030ZAC 115200
- Replace tty.usbserial-A9030ZAC with whatever usbserial shows up in /dev/
Sangoma Appliance Console Defaults
- Speed: 115200n8 1
- Hardware/Software flow control: disabled
9 Comments
Adam Carroll
The Windows driver install continually fails, is there an alternative?
Stuart Taylor
I've never really had a problem with it on Win 7 thru 10, as long as the baud rate is set correctly you should be fine?
I downloaded the exe install.
Adam Carroll
Does yours just work out the box without driver install?
We've tried RJ45 to USB serial via Putty, and RJ45 to COM1 via Putty and HyperTerminal but it fails to make a connection.
Obviously we just want to get a connection to the console to get the ipconfig. Falling at the first hurdle here!
Adam Carroll
Is that for the USB - RJ45 serial? Can you point me in the right direction for that install?
Stuart Taylor
Yep - 2 secs
Stuart Taylor
http://www.ftdichip.com/Drivers/CDM/CDM21216_Setup.exe
That's what I used - worked well.
Let me know how you get on.
Stuart Taylor
be aware - USB Comm port may not necessarily be configured as port 1, more likely 3 or 4.
Adam Carroll
Thanks for your help today. Can get on the console fine now. Having trouble with the GUI now but that can wait until tomorrow.
Stuart Taylor
Good stuff, we have recently purchased three pbxact 1000s which has been a learning curve but they're coming together nicely. If you have any probs give me a shout as I may be able to help. I am in the UK.