Page tree
Skip to end of metadata
Go to start of metadata

THIS WIKI IS COMPLETED

You can set the configuration server directly from the phone or by accessing the phone GUI through a local web browser.

Directly from the Phone

  1. Press the Menu button.


  2. Use the arrow buttons to highlight the Setting option, then press the Enter button.  


  3. Highlight the Advanced Setting option and press the Enter button.


  4. You will then be prompted to enter the password for this device. By default, the password is admin. Use the phone's keypad to enter the password, then press the Enter button.


  5. From here highlight the Auto Provision option and press the Enter button.


  6. You can then use the Switch button to toggle between Upgrade Modes if needed. Be sure TFTP is the selected upgrade mode.


  7. Then arrow down to Config Server. Enter the configuration server. When you are done editing this field, press the Save button. 

If you are using HTTP for the mode you will need to set the Port Number that your PBX is setup to listen on for HTTP provisioning as shown in the Global Settings section of End Point Manager.

Example would be http://10.10.48.2:84 with 84 being the Port Number

Important: If you have enabled HTTP/HTTPS/FTP provisioning with authentication at System Admin (PRO), please refer to this wiki for the proper format of the URL string.


From the Phone GUI

  1. Enter the IP Address of the device into a local web browser.
  2. When prompted, enter admin as the user name. The password, by default, is also admin. Click the OK button to continue.




  3. From the homepage of the GUI, click on Management from the options at the top. Then click on Auto Provision from the dropdown menu.



  4.  From here, you can toggle the Upgrade Mode buttons and edit the Config Server Path field.



  5.  When you are finished, press the Autoprovision Now button. 
  6.  

    If you are using HTTP for the mode you will need to set the Port Number that your PBX is setup to listen on for HTTP provisioning as shown in the Global Settings section of End Point Manager.

    Example would be http://10.10.48.2:84 with 84 being the Port Number

    Important: If you have enabled HTTP/HTTPS/FTP provisioning with authentication at System Admin (PRO), please refer to this wiki for the proper format of the URL string.

  • No labels