Page tree
Skip to end of metadata
Go to start of metadata

Note that variable names are case sensitive, and there are two underscore characters before and after each.

VARIABLEUSEBRANDS
__activecallStatus__LED speed for active callSangoma
__activecallStatusColor__LED color for active callSangoma
__activecallStatusEnable__LED enable for active call 

__adminPass__ 

The Admin Password as defined in the Global Settings Section of EPMALL
__amcolor__AM identifier color for display on the AND clock as defined in the AND templatesAND
__answer__SIP allow auto answer as defined in the Aastra templatesAastra
__audioAlert__BLF Audio Alert KeysSangoma
__b1label__Program button 1 label if the device supports showing a label on a LCD screen for this button. The variable can be __b1label__ thru __b60label__ representing each program button on a device.MOST
__b1type__Program button 1 type such as speed-dial, BLF and others depending on what the device supports. The variable can be __b1type__ thru __b60type__ representing each program button on a device.MOST
__b1value__Program button 1 value such as the speed-dial number that is dialled when button is pressed. The variable can be __b1value__ thru __b60value__ representing each program button on a device.MOST
__background__Image background locationMOST
__backgroundName__Image nameYealink
__backlightActive__Backlight Active LevelSangoma
__backlightInActive__Backlight In-Active LevelSangoma
__backlightTimeout__Backlight timeoutSangoma
__barge__SIP intercom allow barge in as defined in the Aastra templatesAastra
__blfVisual__BLF visual alert enable/disableSangoma
__blfAudo__BLF audio alert enable/disableSangoma
__cadance__Flash Cadance for Algo 8128Algo
__callingX__1-9 Action for calling state on horizontal keys.Digium
__callwaiting__Call Waiting tone stylePolycom
__cid_masquerade__CID Sip Alias for ExtensionALL
__clockcolor__Clock color for the display on the AND clock as defined in the AND templatesAND
__clockfont__Clock font for the display on the AND clock as defined in the AND templatesAND
__colon__Speed of colon blink for the display on the AND clock as defined in the AND templatesAND
__confCallRelease__Three way calling release typeSangoma
__country__Country code for languageSangoma
__destination__This is the IP Address or FQDN that the phone will register to based on what is defined in each device templateALL
__directedCallPickup__Feature code for directed call pick-up.Snom
__dndOff__Feature code to dial to turn off Do Not Disturb as defined in the PBX Feature Code adminSome
__dndOn__Feature code to dial to turn on Do Not Disturb as defined in the PBX Feature Code adminSome
__dnd__Feature code to toggle Do Not Disturb on or off as defined in the PBX Feature Code adminSome
__cfaOn__Call Forwarding Always OnVtech
__cfaOff__Call Forwarding Always OffVtech
__cfnaOn__Call Forwarding Not Available OnVtech
__cfnaOff__Call Forwarding Not Available OffVtech
__cfbOn__Call Forwarding Busy OnVtech
__cfbOff__Call Forwarding Busy OffVtech
__connectedX__1-9 Action for connected state on horizontal keys.Digium
__contactPhoto__URL for Contact PhotosSangoma
__cwOn__Call Waiting OnVtech
__cwOff__Call Waiting OffVtech
__dhcpVlan__DHCP on VLANSangoma
__dialX__1-9 Action for dial state on horizontal keys.Digium
__dialpattern__Dial pattern for templateALL (used by some)
__directory__Directory LocationAastra
__expImagePath__Expansion Module Contact Images PathSangoma
__failoverVPN__Failover VPN configuration address.Sangoma
__failoverXML__Failover XML server path.  Uses backup destination address.Sangoma
__firmware__The path to the firmware folder based on what you pick in the templateMOST
__flash__Algo 8128 Flash styleAlgo
__focus__Switch focus to ringing lines defined as in the Aastra templatesAastra
__ftppass__The FTP password to use for auto provisioning as defined in each device templateALL
__ftpserver__The IP address of the configuration server to use for auto provisioning as defined in each device templateALL
__ftpuser__The FTP username to use for auto provisioning as defined in each device templateALL
__fb__Feedback suppression as defined in the AND templatesAND
__guiOverride__GUI Override settingSangoma
__headset__Headset enable/disableSangoma
__headsetRing__Headset device to ringSangoma
__holdX__1-9 Action for hold state on horizontal keys.Digium
__hotline__Enable offhook dial to this numberSangoma
__idleX__1-9 Action for idle state on horizontal keys.Digium
__incomingX__1-9 Action for incoming state on horizontal keys.Digium
__intercom__Feature code for IntercomALL
__keypress__Code to unlock the door for Algo 8180 as defined in the Algo and CyberData templatesAlgo, CyberData
__keypressTone__Enable/Disable key press toneSangoma
__lcdLanguage__LCD Display LanguageSangoma
__ldapBase__LDAP BaseSangoma
__ldapDisplayName__LDAP Display NameSangoma
__ldapLookupCall__LDAP Lookup For Incoming CallSangoma
__ldapMaxHits__LDAP Max HitsSangoma
__ldapNameFilter__LDAP Name FilterSangoma
__ldapNumberFilter__LDAP Number FilterSangoma
__ldapPassword__LDAP PasswordSangoma
__ldapPort__LDAP PortSangoma
__ldapProtocol__LDAP ProtocolSangoma
__ldapSearchDelay__LDAP Search DelaySangoma
__ldapServerAddress__LDAP Server AddressSangoma
__ldapSort__LDAP Sorting ResultsSangoma
__ldapUsername__LDAP User NameSangoma
__line1Enable__Whether to enable line 1 on the device based on extension mapping section of EPM for phones that support a enable or disable per line. The variable can be __line1Enable__ thru __line24Enable__ representing each line button that is programmed on the device depending on how many lines the device supports.Some
__line1Ext__The extension number to be used for line 1 or the default line for each phone. This is pulled from the extension mapping page for each extension. The variable can be __line1Ext__ thru __line24Ext__ representing each line button that is programmed on the device depending on how many lines the device supports.ALL
__line1extPort__The SIP port for the Extension assigned to account 1.  This is pulled from the extensions module. The variable can be __line1extPort__ thru __line24extPort__ representing each line button that is programmed on the device depending on how many lines the device supports.ALL
__line1Name__The extension name to be used for line 1 or the default line for each phone. This is pulled from the extension name in your PBX based on the extension number associated with this line. The variable can be __line1Name__ thru __line24Name__ representing each line button that is programmed on the device depending on how many lines the device supports.ALL
"__line1Pass__"The extension password to be used for line 1 or the default line for each phone. This is pulled from the extension SIP secret in your PBX based on the extension number associated with this line. The variable can be __line1Pass__ thru __line24Pass__ representing each line button that is programmed on the device depending on how many lines the device supports.ALL
__line1ServerPort__The server registration portALL
__line1Dest__The server registration host name/IP
__line1sipPort__Device listen portALL
__line1VMPass__The extensions voicemail password to be used for line 1 or the default line for each phone. This is pulled from the extension set voicemail password in your PBX based on the extension number associated with this line. The variable can be __line1Pass__ thru __line24Pass__ representing each line button that is programmed on the device depending on how many lines the device supports.ALL
__line1type__What type of function the Line key 1 will be. The variable can be __line1type__ thru __line8type__ representing each line button on the phoneGrandstream
__line1acct__What account the the Line key 1 will be tied to. The variable can be __line1type__ thru __line8type__ representing each line button on the phoneGrandstream
__line1label__What will be displayed on the Line key 1 LCD display. The variable can be __line1type__ thru __line8type__ representing each line button on the phoneGrandstream
__line1value__If the line key is setup for something like a BLF or Speed-dial this would be what number is dialled or monitored for line key 1. The variable can be __line1type__ thru __line8type__ representing each line button on the phoneGrandstream
__linekeys__The number of line keys each registered user should take up for Polycom phones onlyPolycom
__logoled__Logo LED settingsSangoma
__mac__MAC address in upper caseALL
__mac6__First 6 digits of MAC address in upper caseALL
__micvolume__Mic volume as defined in the AND templatesAND
__misscallsStatus__LED speed for missed callsSangoma
__misscallsStatusColor__LED color for missed callsSangoma
__misscallsStatusEnable__LED enable for missed callsSangoma
__missed__Whether to display missed calls on the device for Polycom Phones only as defined in the Polycom templates.Polycom
__mode__Sip detect mode for Algo 8128Algo
__model__Model of phone as defined in the Extension Mapping for Audio Codes and CyberDataAudio Codes, CyberData
__monitored__Monitored event for Algo 8128Algo
__msgfont__Message font for the display on the AND clock as defined in the AND templatesAND
__msgcolor__Message color for display on the AND clock as defined in the AND templatesAND
__multicastAddress__Multicast address and port, comma separated. Also used are __multicastAddress2__ - __multicastAddress6__Some
__multicastEnable__Multicast enableSome
__mute__SIP intercom mute mic as defined in the Aastra templatesAastra
__offset__GMT time offsetPolycom
__offhook__Auto off hook as defined as in the Aastra templatesAastra
__outboundcid__Outbound Caller ID from extensions.All
__pcport__PC Port settingHtek
__pincode0__Pin code for unlocking door on Cyberdata devices. The variable can be __pincode0__ thru __pincode9__ as defined in the Cyberdata templatesCyberData
__pmcolor__PM identifier color for display on the AND clock as defined in the AND templatesAND
__powerStatus__LED speed for power statusSangoma
__powerStatusColor__LED color for power statusSangoma
__powerStatusEnable__LED enable for power statusSangoma
__PriAcctName__Primary Account NameAll
__pringtone__Audio page tone for the Algo 8180 as defined in the Algo templatesAlgo
__pvolume__Audio page volume for the Algo 8180 as defined in the Algo templatesAlgo
__protocol__Download protocol as defined in each device templateALL
__provisionAddress__The IP address of the configuration server to use for auto provisioning as defined in each device templateSome
__provisionport__HTTP port to use for provisioning as defined in the global settings section of EPMALL
__record__Feature code for RecordSangoma
__remoteDisconnect__Remote disconnect settingSangoma
__restapps__RESTapps file locationAastra/Digium/Yealink
__phoneApps__URL for phone applicationsAastra/Digium/Obihai/Sangoma/Yealink
__ringingStatusSpeed__LED speed for ringing statusSangoma
__ringingStatusSpeedColor__LED color for ringing statusSangoma
__ringingStatusSpeedEnable__LED enable for ringing statusSangoma
__ringtone__Audio ring tone for Sangoma PhonesSangoma
__ringtoneUrl__Path to ring tone locationsSangoma
__rringtone__Audio ring tone for the Algo 8180 as defined in the Algo templatesAlgo
__rvolume__Audio ring volume for the Algo 8180 as defined in the Algo templatesAlgo
__screensaver__Screen saver setting for Sangoma PhonesSangoma
__scrollLabel__Enable line key label scrollingSangoma
__seccolor__Second color for display on the AND clock as defined in the AND templatesAND
__seconds__Whether to display seconds on the AND clock as defined in the AND templatesAND
__sipPort__SIP port to use for SIP as defined in the global settings section of EPMALL
__speeddial1__Speed-dial for button number 1 on the phone as defined in the device template for devices that support this feature.   The variable can be __speeddial1__ thru __speeddial9__ representing numbers 1-9 on the keypad of the phone.Some
__spkrvolume__Speaker volume as defined in the AND templatesAND
__srtpMode1__SRTP Mode (__srtpMode1-4)Sangoma
__ssImage__URL to image for Screen SaverSangoma
__stutter__Stutter disabled as defined as in the Aastra templatesAastra
__textLogo__Logo Screen Saver TextSangoma
__timeformat__Time format as defined in the AND templatesAND
__timeOff__Length of time for led to be off for Algo 8128Algo
__timeOn__Length of time for led to be on for Algo 8128Algo
__timeout__SIP digit timeout as defined in the Aastra templatesAastra
__timeserver1__Time server1 as defined in the device templates.ALL
__timeserver2__Time server2 as defined in the device templates if they support 2 time serversSome
__timeserver3__Time server3 as defined in the device templates if they support 3 time serversSome
__timezone__Time zone code as defined in the Device templates for the time zoneALL
__timezone2__Time zone code for Panasonic UT670 only as defined in the Panasonic template for the time zonePanasonic
__timezonembu__Time zone code for Aastra MBU400 only as defined in the Aastra template for the time zoneAastra
__timezonename__Time zone name as defined in the Aastra, Xorcom, Yeaklink templates for the time zoneSOME
__toneset__Tone set as defined in the Aastra templatesAastra
__transport1__SIP Transport type (__transport1-4__)Sangoma
__userPass__User password as defined in the Global Settings Section of EPMALL
__version__Version of the firmware that is used as defined in the device templatesPanasonic
__visualAlert__BLF Visual Alert keysSangoma
__voicemail__Feature code to dial to access the voicemail system as defined in the PBX Feature Code adminALL
__voicemailExt__Voicemail Extension from Extensions page.  Added in 12.0.0.78None
__voicemessageStatus__LED speed for voice message waitingSangoma
__voicemessageStatusColor__LED color for voice message waitingSangoma
__voicemessageStatusEnable__LED enable for voice message waitingSangoma
__webport__Port for Aastra XML scripts as defined in the Global Settings sectionAastra

__wEnable1__

Wireless enable for network 1Incom Grandstream
__wEncryption1__Wireless encryption typeGrandstream
__wSecurity1__Wireless security type for network 1Incom Grandstream
__wssid1__Wireless SSID for network 1Incom Grandstream
__wWEPBits1__WEP Bits (64/128) for network 1Incom Grandstream
__wWPAPSKKey1__WPA PSK key phrase for network 1Incom Grandstream
__wWPAPSKPass1__WPA PSK encrypted password for network 1Incom Grandstream
__z001__Zone controllers for the Cyberdata Zone Paging Server. The variable can be __z001__ thru __z144__ as defined in the Cyberdata templatesCyberData
  • No labels