This wiki is for the commercial End Point Manager. For the free version, please see OSS End Point Manager.
With the commercially supported Sangoma PBX End Point Manager (EPM), you can use the GUI interface to directly auto-provision and configure popular desk phones, wireless phones, door phones, overhead paging devices, gateways, and specialty devices from the following manufacturers:
- Phoenix Audio
Please note we do not support "Device and User mode" in FreePBX. Only the default "Extension mode" is supported, but plenty of users have stated it works fine in "Device and User mode" when doing one-to-one device user mapping.
Per Brand Templates
For each type of device, you can create one or more templates that can be used to generate configuration files.
Upload images for use in templates that support phone-side images
Define Global Settings
Define global settings that EPM will use for all templates, such as external and internal IP addresses of your PBX.
Map your extensions to a specific MAC address and assign a template.
Gives advanced users full control over all settings, including those defined by the default settings. Edits will not be overwritten by module upgrades.
Allows you to choose which firmware to load on a per device/template basis. Valuable for testing new firmware.
Supported devices are listed here: EPM-Supported Devices