Search

Search

Help

Page 1 of 140. Showing 1,398 results (0.075 seconds)

  1. Device & User Mode

    User & Device mode is only recommended for Advanced users. Many parts of FreePBX do not support this mode. About Device & User Mode By default, FreePBXDevice (Phone) is assigned one User (Extension) and they cannot be changed without accessing the FreePBX User Interface. A single module, entitled "Extensions
    PBX GUIOct 12, 2016
  2. Configuring an Obi 100/110 device to act as a FreePBX Extension

    Setup an Extension in FreePBX Setup an extension on your FreePBX just like you’d setup any other extension. Make a note of the extension and password, as you'll need them for the next step. Setup the Obi Device Once you’ve determined the IP Address of your FreePBX and your extension and your extension password, you
  3. Registering Vega with FreePBX

    Vega Configuration The following steps illustrate how to register your Vega with FreePBX. This guide applies to Vega 100/200/400 and Vega FXO 1. Log into your … . Insert your FreePBX IP address in 'SIP Server IP/Name' c. Under 'Registration and Authentication ID' and 'Authentication Password' insert the registration
    Vega Gatewaysabout 5 hours ago
  4. Configuring an Obi 110 Device as an FXO Gateway (i.e., to allow FreePBX to use a regular phone line)

    Rule above isn’t necessary, but I use it to prevent users from dialing 411. Trunk Name: OBITRUNK1 Note: The Trunk Name above (the second one in FreePBX) must … 1. Set a static IP address for your Obi 110 device: System Management: Network Settings: Internet Settings: Addressing Type: Static IPAddress: Pick an IP
  5. Device Status

    machines plugged into that CPE device will not be able to send or receive faxes. Only Super Users and Fax Admin users can manage Device Alerts. See Different Types of Fax Users Explained. How to Navigate to the Devices > Status Section Log into the eFax Portal at http://fax.sipstation.com http://fax.sipstation.com
    SIPStation and FAXStationMar 29, 2016
  6. EPM-Supported Devices

    fee to have FreePBX Certify their devices and provide direct support to Customers on FreePBX systems. The Manufacture has access to the FreePBX Dev team for any issues that may arise using their devices with FreePBX. Whenever possible you should only user Certified Manufactures with your FreePBX System. New features
    PBX GUIDec 21, 2016
  7. eFax Device Section

    Settings and alerts for any CPE devices can be managed here. Only Super Users and Fax Admin users can see the Devices Section. See Different Types of Fax Users Explained. How to Navigate to Devices Section Log into the eFax Portal at http://fax.sipstation.com http://fax.sipstation.com Click the Devices item
    SIPStation and FAXStationOct 24, 2016
  8. User Manager Hooking and Functions

    The User Manager module houses all Users that are not part of device/user mode but are still linked to extensions. These users are used around FreePBX to get … This hook is called when a user is added, either through the Device/Users, Extensions or User Manager Page setupuserman()>registerHook('addUser','myFunctionName
  9. Device Alerts

    . These alerts can help you monitor the status of your FAXStation devices. Only Super Users and Fax Admin users can manage Device Alerts. See Different Types of Fax Users Explained. How to Navigate to Devices > Alerts Section Log into the eFax Portal at http://fax.sipstation.com http://fax.sipstation.com Click the Devices
    SIPStation and FAXStationMar 29, 2016
  10. Device Settings

    set up on the DID, the fax will still be emailed out, but it will not be sent to the attached fax machine on this device. Only Super Users and Fax Admin users can manage Device Alerts. See Different Types of Fax Users Explained. How to Navigate to Devices > Settings Section Log into the eFax Portal
    SIPStation and FAXStationMar 29, 2016